버전
menu

경고: 보호된 일부 정보는 표시되지 않습니다.
특정 플랫폼에 대한 라이센스가 있는 사용자인 경우 로그인하세요.

Mastering Suite

Mastering Suite(마스터링 스위트)는 여러 출력 장치에서 재생될 믹스를 향상시키는 기능을 제공하는 무료 플러그인입니다. This all-in-one Audio Device Effect plug-in provides four modules: “Parametric EQ”, “Multiband Compressor”, “Master Volume”, and “Limiter”. 연결된 종단점과 출력 환경의 특성에 따라 이 모듈을 조정하면 오디오 출력의 전반적인 음질을 향상시킬 수 있습니다.

설치

To use the Mastering Suite, the plug-in must be installed on Wwise. See Installing Premium and Partner Plug-ins. The plug-in requires a license to be activated and for SoundBanks to be generated successfully. You can acquire a free license from Audiokinetic at Plug-ins: Mastering Suite.

After the plug-in is installed, the Mastering Suite factory assets will be added to newly created projects by default. Use the “Import Factory Assets” dialog to add them to existing projects.

용례

Mastering Suite 플러그인은 오디오 파이프라인의 가장 마지막 단계에서 사용하도록 제작되었습니다. 그렇기 때문에 System Audio Device의 마지막 Effect 공간에만 삽입될 수 있습니다. This is done in the Effects tab of the Audio Device Editor. “Audio Device Editor: Effects”을(를) 봐주세요.

The following ShareSets are included with the factory assets for common use cases:

  • Headphones(헤드폰)

  • HomeCinema

  • HomeCinemaHeightBoost

  • NightMode

  • NightModeStrong

  • SoundBar

  • TV(텔레비전)

[경고]경고

  1. Only one instance of the Mastering Suite is supported at any time. This plug-in only operates on the full mix, and is therefore categorized as an Audio Device Effect. See “Understanding the voice pipeline” for more details on the Wwise voice pipeline.

  2. Mastering Suite is designed to use a speaker-based output configuration of up to 7.1.4 channels. Using other types of output configurations such as Ambisonics causes the plug-in initialization to fail.

  1. “Parametric EQ”: 각 대역의 필터 모드, 주파수, 공명, 게인 설정.

  2. “Multiband Compressor”: 각 대역의 주파수, 어택/릴리즈 시간, 스레숄드, 비율, 보충 게인, 니(knee) 설정.

  3. “Master Volume”: 각 채널의 볼륨 설정.

  4. “Limiter”: 소프트 니(soft-knee), 하드 니(hard-knee), 고급 리미팅.

네 개의 모듈은 서로 연결되어 있으며 비활성화된 모듈은 우회(bypass)됩니다. 각 모듈의 상단 좌측 모서리에는 체크 상자가 있습니다. 이 체크 상자를 사용하면 모듈이 필요하지 않을 경우 비활성화하거나, 시험을 위해 특정 모듈을 고립시킬 수 있습니다.


이 페이지가 도움이 되었나요?

지원이 필요하신가요?

질문이 있으신가요? 문제를 겪고 계신가요? 더 많은 정보가 필요하신가요? 저희에게 문의해주시면 도와드리겠습니다!

지원 페이지를 방문해 주세요

작업하는 프로젝트에 대해 알려주세요. 언제든지 도와드릴 준비가 되어 있습니다.

프로젝트를 등록하세요. 아무런 조건이나 의무 사항 없이 빠른 시작을 도와드리겠습니다.

Wwise를 시작해 보세요